2005.09-2009.07，北京科技大学冶yl6809永利(中国)股份有限公司，冶金工程专业，学士。
2009.09-2015.01，北京科技大学冶yl6809永利(中国)股份有限公司，冶金工程专业，博士。
2015.03-2016.03，韩国浦项工科大学（POSTECH），材料科学与工程学院，材料科学与工程，博士后。
2016.03-2020.06，北京科技大学，冶yl6809永利(中国)股份有限公司，讲师。
2020.06-至今，北京科技大学，冶yl6809永利(中国)股份有限公司，副教授。
代表性论著：
[1] Jing Guo, Shaowei Han, Xingrun Chen, eta al. Control of Non-metallic Inclusion Plasticity and Steel Cleanliness for Ultrathin 18 Pct Cr-8 Pct Ni Stainless Steel Strip. Metall. Mater. Trans. B, 2020，48B, online.
[2] Jing Guo, M.D.Seo, J.W. Cho et al. Control of Crystal morphology for Mold Flux during High-Aluminum AHSS Continuous Casting Process. Metall. Mater. Trans. B, 2016，47B(4):2211-2221
[3]郭靖，方克明，郭汉杰等，钢中第二相粒子形貌的预报理论和检测方法，金属学报，2017，53(7) :789-796. IF 0.704
[4] Jing Guo, K M Fang, Guo Han et al. Determination of three-dimensional morphology and inner structure of second-phase inclusions in metals by non-aqueous solution electrolytic and room temperature organic methods[J]. Metals. 2018，8(1)，68. IF 1.704 [5]Guo Jing, Cheng S, Guo H, Mei Y . Novel mechanism for the modification of Al2O3-based inclusions in ultra-low carbon Al-killed steel considering the effects of magnesium and calcium[J]. International Journal of Minerals, Metallurgy, and Materials, 2018, 25(3): 280-287.
[6]Guo Jing, Yang W S, Shi Xiao, et al. Effect of Sulfur Content on the Properties and MnS Morphologies of DH36 Structural Steel. Metals. 2018, 8(11)，945.
[7]Guo Jing, Cheng Shu-sen, Guo Hanjie et al. Determination of non-metallic inclusions in a continuous casting slab of ultra-low carbon interstitial free steel by applying of metallographic method, electrolytic method and RTO technique. Scientific report.2019, 9(2),2929
[8] Guo Jing, Cheng Shu-sen, Guo Hanjie et al.Thermodynamics and Industrial Trial on Increasing the Carbon Content at the BOF Endpoint to Produce Ultra-Low Carbon IF Steel by BOF-RHCSP Process. HIGH TEMPERATURE MATERIALS AND PROCESSES,2019,38,822-826.
[9]Guo Jing ,Chen X.R, Han S.W, Yan Y, Guo, H.J. Evolution of plasticized MnO-Al2O3-SiO2-based nonmetallic inclusion in 18wt%Cr-8wt%Ni stainless steel and its properties during soaking process. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS. 2020，27(3):328-339.
[10] Guo Jing, Cheng Shu-sen, Cheng Zi-jian. Mechanism of Non-metallic Inclusion Formation and Modification and Their Deformation during CSP Process for Aluminum-Killed Steel [J]. ISIJ. Int., 2013, 53(12): 2142-2151.
[11] Guo Jing, Cheng Shusen, Zhao Hongbo, Du Pengyu, Pan Hongwei. A Mechanism Model for Raceway Formation and Variation. Metallurigical and Materials Transactions B,2013,44B(3),487.
[12] Guo Jing, Cheng Shusen, Cheng Zi-jian,Xin Lei. Thermodynamics for Precipitation of CaS Bearing Inclusion and Their Deformation During Rolling Process for Al-killed Ca-treated Steel [J]. Steel Res. Int., 2013, 84 (6): 545-553.
[13] Guo Jing, Cheng Shusen, Cheng Zijian. Characteristics of Deoxidation and Desulfurization during LF Refining for low carbon Al-killed steel [J]. Journal of Iron and Steel Research International，2014， 21(2):166-173.
[14] 郭靖，程树森，程子建，等. 铝镇静钢钙处理后氧化铝夹杂物变性动力学模型. 北京科技大学学报，2014，36(4) 424-431.
[15] 郭靖，程树森，程子建，等. CSP流程低碳低硅铝镇静钢精炼渣成分优化[J]. 北京科技大学学报，2014，36（sup1): 194-199.
[16]郭靖,程树森,李积鹏,颜坤,梅亚光. CSP流程低碳铝镇静钢铸坯碳覆夹杂物析出行为[J].钢铁研究学报,2016,28(04):21-27.
[17]郭靖，程树森，程子建，等. 铝镇静钢钙处理后碰撞行为对Al2O3夹杂物变性的作用[J]. 钢铁，2013, 48(9): 37-44.
[18] 郭靖，程树森，程子建，等. 酒钢CSP流程SPCC钢夹杂形成机理研究[J]. 过程工程学报，2013，12（4）：314-320.
